Philips 29PT9009, Руководство пользователя

Страница: 10 / 30

Source
This menu allows you to indicate the peripheral
you connected to one of the external inputs.
&
Press the cursor right to enter the list of types
of peripherals attached to the selected input.
é
Select the peripheral device with the cursor
up/down.
Once you have selected the source type, e.g.
DVD, this source will automatically be selected
when your remote control is in DVD mode,
see p. 3, and when you press the
v
key on
the remote control.
Centre input
When you have connected a Cinema Link
surround receiver to the TV (See separate
Cinema Link instruction manual supplied) and
you have selected
EXT1
as centre input, the
loudspeakers of the TV will act as centre
speaker, making a separate centre speaker
unnecessary.
8
Set/Change code
The Child lock feature (see TV, Features, p. 11)
allows you to lock channels to prevent others
from watching certain programmes.To watch
locked channels, a 4-digit code must be
entered.The Set/Change code menu item
allows you to create or change a Personal
Identification Number (PIN).
& Select
Set/Change code
.
é
If no code exists yet, the menu item is set to
Set code.
If a code has previously been entered, the menu
item is set to
Change code
. Follow the
instructions on screen.
Important:You have forgotten your code !
& Select
Change code
in the General menu and
press
OK
.
é Press the cursor right and enter the overriding
code 8-8-8-8.
“ Press the cursor again and enter a new
personal 4-digit code.The previous code is
erased and the new code is stored.
Source
EXT1
EXT2
SIDE
Centre input
Setup
If a decoder or a descrambler is connected, see
p. 15, you can define one or more programme
numbers as decoder programme numbers.
&
Select Decoder with the cursor right.
é Select
Programme
.
“
Select the programme number under which
you have stored the programme coming from
your decoder.
‘ Select
Status
.
• Select the input used to connect your
decoder:
None
,
EXT1
or
EXT2
.
• Select
None
if you do not want the selected
programme number being activated as a
decoder programme number.
Note: Select
EXT2
when the decoder is connected
to your EasyLink video recorder.
Decoder
Decoder
Programme
Status
Setup
Demo
The Demo menu allows to demonstrate the TV
features separately or in a continuous loop.
If Auto demo has been selected the demo will
automatically present the features sequentially in a
loop. Press one of the cursor keys to stop the
Auto demo.
If one of the features has been selected, this
particular feature demo will run only once, and the
Demo menu will reappear.
Note: The Dealer demo is not part of the automatic
sequence and can only be activated separately.
Auto demo
......
Dealer demo - Digital options
- Light sensor
- Comb filter
TV
Setup
Demo
Install
2293.2 gb 15-04-2004 15:38 Pagina 8