19
English
9
Use
◄►
to select your preferred energy efficiency level, then press
OK
.
10
Use
◄►
to select your preferred sound setting, then press
OK
.
11
Press
OK
to finish
Settings assistant
.
•
Network updates
will appear after
Connection test
succeeds.
Use
◄►
to select
Yes
, then press
OK
.
• When the initial setup is completed, the lowest memorized
channel with the confirmation message will be displayed on the
TV screen.
After an initial setup is completed...
• If you want to scan the channels automatically again.
Autoprogram
➟
p.34
• You can add the desired cable and Analog channels
unmemorized by AutoProgram.
Weak channel installation
➟
p.34
• If you want to change to another language.
Language
➟
p.33
• If you want to change the country setting.
Country
➟
p.45
• If you want to change the location setting.
Location
➟
p.35
• If you want to change the network setting.
Network
➟
p.37
• If you want to restore the picture and sound setting.
Settings assistant
➟
p.27
Note
• If you are not receiving a signal from your cable service, contact the Cable provider.
• If you press
during autoprogram, this setup of TV channels will be cancelled.
• The initial AutoProgram function can be executed for either
Antenna
or
Cable
only
once. When you change the connection (Antenna / Cable), select
Autoprogram
again.
➟
p.34
Select the energy efficiency level you prefer.
Personal
Energy saving
Select your preferred sound setting
Sound A
Sound B
Sound C
Store your preferences.
Cancel
Store
