Philips 28PW9551, Руководство пользователя

Страница: 23 / 61

15
Features settings - General
1
Press key to start. A main menu
appears.
2
Press cursor down key to select
Features
. Press cursor right key to
enter features settings.
3
Press cursor up or down key to
select settings.
4
Press cursor right key to start
selection or adjustment.
For
Timer
,
Parental Cont.
and
Demo , go to page 16 to 18 for details.
For Child Lock , Rotation , DNR ,
Dyn. Contrast and Active Control ,
press up or down cursor key to select
settings. To return to the previous
screen display, go to step 6. Repeat
steps 3 to 4 to adjust more settings.
To end go to step 7.
5
Press cursor right key to confirm.
6
Press cursor left key to end selection
or adjustment.
7
Press the key repeatedly to
remove the menu from the screen.
Your TV is ready for viewing.
The TV includes some special features to enhance your viewing pleasure. They are:
Timer : Sets sleeptimer, change channels or switch on the TV, at a preset time.
Child Lock : Locks all the control buttons on the TV. Can operate TV with the remote control only.
Parental Cont (rol): Locks selected channels.
Rotation : Adjusts picture tilting (only available in widescreen TVs).
DNR
(Dynamic Noise Reduction): Reduces picture interferences or “noise” in poor reception conditions.
Dyn (Dynamic) Contrast : Enhances the contrast of details in lighter, average and darker areas.
Active Control : Optimises picture quality by measuring and analyzing the incoming signal to automati-
cally adjust picture quality settings. The “Light Sensor” setting uses a sensor to adjust the picture bright-
ness depending on the room light conditions.
Demo
: Demonstrates the benefits of Pixel plus and Active Control.
Child Lock : Select “On” to lock all the control buttons
and “Off” to unlock.
Rotation : Press cursor up to tilt the picture to the right
or press cursor down to tilt the picture to the left.
DNR : Select Min, Med (optimum position), Max or Off.
Dyn . Contrast : Select Min, Med (optimum position), Max
or Off.
Active Control
: Select “On” to optimise picture quality
or “Light Sensor” to optimise with sensor capability.