background image

25

Positioning the TV

For the best results, choose a position where
light does not fall directly on the screen, and at
some distance away from radiators or other
sources of heat. Leave a space of at least 5 cm
all around the TV for ventilation, making sure
that curtains, cupboards etc. cannot obstruct
the air flow through the ventilation apertures.
The TV is intended for use in a domestic
environment only and should never be
operated or stored in excessively hot or humid
atmospheres.

General Points

Please take note of the section entitled 'Tips' at
the end of this booklet.

Interference

The Department of Trade and Industry
operates a Radio Interference Investigation
Service to help TV licence holders improve
reception of BBC and IBA programmes where
they are being spoilt by interference.
If your dealer cannot help, ask at a main Post
Office for the booklet "How to Improve
Television and Radio Reception".

Mains connection

Before connecting the TV to the mains, check
that the mains supply voltage corresponds to
the voltage printed on the type plate on the
rear panel of the TV. If the mains voltage is
different, consult your dealer.

Important

This apparatus is fitted with an approved
moulded 13 Amp plug.To change a fuse in this
type of plug proceed as follows:
1. Remove fuse cover and fuse.
2. Fit new fuse which should be a BS1362 5A,

A.S.T.A. or BSI approved type.

3. Refit the fuse cover.
In order to maintain conformity to the EMC
directive, the mains plug on this product must
not be removed.

Connecting the aerial

The aerial should be connected to the socket
marked 

:

at the back of the set.An inferior

aerial is likely to result in a poor, perhaps unstable
picture with ghost images and lack of contrast.
Make-shift loft or set-top aerials are often
inadequate.Your dealer will know from experience
the most suitable type for your locality.
Should you wish to use the set in conjunction
with other equipment, which connects to the
aerial socket such as TV games, or a video
camera it is recommended that these be
connected via a combiner unit to avoid repeated
connection and disconnection of the aerial plug.

Fitting the stand (if provided)

Use only the stand provided with the set,
making sure that the fixings are properly
tightened.A diagram showing how to assemble
the stand is packed with the stand.
Never use a make-shift stand, or legs fixed with
woodscrews.

Information for users in the UK     (Not applicable outside the UK)

Содержание 28PW6826





























Отзывы: