Philips 24HFL3009D, Руководство пользователя

Страница: 31 / 84

Digital channels
If you know your cable provider is not offering digital channels,
you can skip searching for digital channels.
Select
Off .
Analogue channels
If you know your cable provider is not offering analogue
channels, you can skip searching for analogue channels. Select
Off .
Free / Scrambled
If you have a subscription and a CAM - Conditional Access
Module for pay TV services, select
Free + scrambled . If you did
not subscribe to pay TV channels or services, you can select
Free channels only.
Reception quality
If you receive digital channels, you can check the quality and
signal strength of a channel.
If you have your own antenna, you can reposition the antenna
to try and improve the reception.
To check the reception quality of a digital channel . . .
1 - Tune to the channel.
2
- Press

and select
Setup
and press
OK
.
3 - Select Channel settings > Channel installation > Digital :
reception test and press OK .
The digital frequency is shown for this channel. If the reception is
poor, you can reposition your antenna. To check the signal
quality of this frequency again, select
Search and press OK .
To enter a specific digital frequency yourself, use the remote
control digit keys. Alternatively, select the frequency, position the
arrows on a number with

and

and change the number with
 and  . To check the frequency, select Search and press OK .
If you use DVB-C to receive channels, the option Symbol rate
mode is
available. For Symbol rate mode, select
Automatic
,
unless your cable provider gave you a specific symbol rate value.
To enter the symbol rate value, use the number keys.
Manual installation
Analogue TV channels can be manually installed, channel by
channel.
To install analogue channels manually . . .
1 - Professional Mode: Off  Press  and select Setup and
press OK .
Professional Mode: On  Enter the Professional Home Menu.
2 - Select Channel settings > Channel installation > Analogue :
Manual installation and press OK .
• System
To set up the TV system, select System and press OK .
Select your country or the part of the world where you are
now.
•
Search channel
To find a channel, select Search channel and press
OK
. Select
Search and press OK . You can also enter a frequency yourself. If
the reception is poor, press Search again. If you want to store
the channel, select
Done
and press
OK
.
• Fine tune
To fine tune a channel, select Fine tune and press OK . You can
fine tune the channel with  or  .
If you want to store the channel found, select Done and press
OK .
• Store current channel / Store as new channel
You can store the channel on the current channel number or as
a new channel number.
Select
Store current channel or Store as new channel .
You can redo these steps until you have found all available
analogue TV channels.
31