Philips 241S4LCB/00, Руководство по обслуживанию

Страница: 63 / 81

ġ
ġ
ġġġġġġ
ġ
ġ
5HY
7\SH
'DWH
%UDQG
3DJH
ġ
ġġġġġġġġġġġġġġġġġġġġġ
0.1 M4 241S4 / 241B4 24” Wide 16:9 LCD Monitor
2011/07/12 PHILIPS 15 of 20
6//&'
ġ
5.9 If paint is used
x
RoHS required
x
WEEE require
x
If new painting type need to implement, refer to UN-D 1235.
5.10 Plastic mold tooling
x
Tooling to be designed to minimize cosmetic defects induced by molding process (sink, blush,
weld lines, gate marks, ejector marks, etc.). Refer to “TYV61-90007”.
x
Painting to cover up cosmetic defects due to molding is strongly discouraged.
x
China RoHS mark requested.
5.11 Plastics flammability
x
All Plastics to be Flame Retardant UL 94-HB or Better.
x
Base / Pedestal to be Flame Retardant UL 94-HB.
x
All major plastic parts (bezel, back cover) need to be molded from same resin.
x
Plastic resin type selection should be referred to “plastic-Philips Pool monitor”.
5.12 Texture/Glossing of housing
x
The texture area and texture no should follow Philips make-up sheet.
x
The exterior surfaces shall have a uniform texture.
x
Philips must approve the mold texturing.
x
Detail document for texture refer to “UN-D249”, “UN-D 600”.
x
Glossy surface > = 80 gloss units
5.13 Tilt and swivel base
x
Tilt angle : -5
q
+2/- 0
q
(forward)
+20
q
+ 0/- 3
q
(backward)
x
Swivel angle : nil
x
High Adjustment : nil
x Portrait Display : nil
5.14 Kensington Lock
x
Must meet Kensington_slot.spec “TYE-M0004”.
x
MMD request metal plate in Kensington hole.