Philips 230E1HSB, Руководство по обслуживанию, Страница: 73 / 76

230E LCD
73
Mode Chromaticity Coordinate
OSD setting Temp. x y
Remark
0.313 ±0.020 0.329 ±0.020 For product Spec(DQA test)
0.313 ±0.015 0.329 ±0.015 For OQC Test:
Warm 6500K
0.313 ±0.005 0.329 ±0.005 For production alignment test
0.283 ±0.020 0.298±0.020 For product Spec(DQA test)
0.283 ±0.015 0.298±0.015 For OQC Test: Cool 9300K
0.283 ±0.005 0.298±0.005 For production alignment test
User Panel White x Panel White y
The test standard condition :Brightness control is at 100 contrast control is at 50
8.13 Distance between TFT LCD monitor and CRT/TFT monitor
Conducted with different modes or frequencies. No interference in a distance down to 25 cm.
9. ENVIRONMENT
(EE)
9.1 Environmental characteristics
The following sections define the interference and susceptibility condition limits that might occur between external
environment and the display device.
Operating:
- Temperature : 5°C to 40°C
- Humidity : 20% to 80%
- Altitude : 0 to 5000 M
Storage:
- Temperature : -20 to 60 degree C
- Humidity : 10% to 80%
- Altitude : 0 to 12000M
Note: recommend at 5 to 35qC, Humidity less than 60 %
10. REGULATORY STANDARDS
(Safety)
Note: All certificates must be raised under the name of Philips
10.1 Safety approvals
; CB report
; CE
10.2 Power management
; Energy Star
10.3 Certificates, Reports for the production start
When the first production of the monitor starts the following documents must be sent to Philips by mail. All reports
must be raised under “Philips” and have to show W0ZR model name .
;CB report
;CE
;FCC
;Service manual