Philips 22PFS5403/12, Руководство по обслуживанию

Страница: 25 / 61

Kleernet (Wireless
Audio)
2 32 SOC I²CM1 E EB SSB
DTV Tuner 2 34 SOC I²CM2 E C0 EB
Silab Si2157
(H/T models)
Sony Helene
(K/S models)
SSB
Tuner DVB-S2 2 36 SOC I²CM2 E C6 EB STV 6111 SSB
Class-D 2 37 SOC I²CM3 E 36 EB TAS 5731 PHP SSB
FPGA PQ 2 38 SOC I²CMCU E 84? EB Durango SSB
2nd Audio amplifier 2 39 SOC I²CM3? E ? EB ? SSB
T° sensor SSB/set 2 42 SOC I²CM1 E 98 EB LM 75 T°sensor
Light sensor 6 43 SOC I²CM3 E 72 EB TSL2571 SET
SOC doesn’t boot (SW
cause)
2 53 St-by µP P D4 BL MT5593 SSB
NT72324 2 61 SOC I²CM2 E 34 EB NT72324 SSB
NT72323 2 62 SOC I²CM2 E A4 EB NT72323 SSB
Splash error 2 65 SOC - E - EB
NT314, MT
5593,
SSB
5.2.4 How to Clear the Error Buffer
The error code buffer is cleared in the following cases:
• By using the CLEAR command in the SAM menu
• By using the CLEAR command in the Factory mode:
• By using the following key sequence on the remote control transmitter: “ 062599 ” directly followed by the OK button.
• If the contents of the error buffer have not changed for 50 hours, the error buffer resets automatically.
Note: If you exit SAM by disconnecting the mains from the television set, the error buffer is not reset.
5.3 Panel Code
Press the following key sequence on a standard RC transmitter: “062598” directly followed by MENU and “xxx”, where “xxx” is a 3 digit decimal value of the
panel type: see column “Display Code” in below tab. After resetting the Display Code, restart the set immediately.
CTN_ALT BOM# Panel Type Display Code
22PFS5303/12 TPM215WF1-WU3101.K 485BE 034
22PFS5403/12 TPM215WF1-WU3101.K 485BE 034
22PFT5303/05 TPM215WF1-WU3101.K 485BE 034
22PFT5303/12 TPM215WF1-WU3101.K 485BE 034
24PFS5303/12 TPM238WF1-LF1L0.Q S1F 035
24PFS5703/12 TPM236WF1-HJJP02.N SC4M 036
24PFT5303/05 TPM238WF1-LF1L0.Q S1F 035
24PFT5303/12 TPM238WF1-LF1L0.Q S1F 035