background image

English

5

1  Notice

Trademarks are the property of Koninklijke Philips Electronics N.V. or 

their respective owners. 
P&F USA reserves the right to change products at any time without 

being obliged to adjust earlier supplies accordingly.
The material in this User Manual is believed adequate for the intended 

use of the system. If the product or its individual modules or procedures 

are used for purposes other than those specified herein, confirmation 

of their validity and suitability must be obtained. P&F USA warrants 

that the material itself does not infringe any United States patents. No 

further warranty is expressed or implied.
P&F USA cannot be held responsible neither for any errors in the 

content of this document nor for any problems as a result of the 

content in this document. Errors reported to P&F USA will be adapted 

and published on the P&F USA support website as soon as possible.

Pixel characteristics

This LCD product has a high number of color pixels. Although it has 

effective pixels of 99.999% or more, black dots or bright points of light 

(red, green or blue) may appear constantly on the screen. This is a 

structural property of the display (within common industry standards) 

and is not a malfunction.

Warranty

No components are user serviceable. Do not open or remove covers 

to the inside of the product. Repairs may only be done by Service 

Centers and official repair shops. Failure to do so shall void any 

warranty, stated or implied. 
Any operation expressly prohibited in this User Manual, any adjustments 

or assembly procedures not recommended or authorized in this 

User Manual shall void the warranty.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits 

for a Class B Digital device, pursuant to part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against 

harmful interference in a residential installation. This equipment 

generates, uses, and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause 

harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If 

this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one 

or more of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and the receiver.

•  Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected.

•  Consult the dealer or an experienced radio or television technician 

for help.

Declaration of Conformity

Trade Name :

PHILIPS

Responsible Party :

P&F USA, Inc.

Model :

32PFL4507, 26PFL4507, 22PFL4507

Address :

PO Box 2248, Alpharetta, GA 30023-2248 

U.S.A.

Telephone Number :

1 866 309 0843

Modifications

This apparatus may generate or use radio frequency energy. Changes or 

modifications to this apparatus may cause harmful interference unless 

the modifications are expressly approved in the User Manual. The user 

could lose the authority to operate this apparatus if an unauthorized 

change or modification is made.

Cables

Connections to this device must be made with shielded cables with 

metallic RFI / EMI connector hoods to maintain compliance with FCC 

Rules and Regulations.

Canadian notice

This Class B Digital apparatus complies with Canadian ICES-003.

Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7.

Copyright

All other registered and unregistered trademarks are the property of 

their respective owners.

   

The terms HDMI and HDMI High-Definition 

Multimedia Interface, and the HDMI Logo are 

trademarks or registered trademarks of HDMI 

Licensing LLC in the United States and other 

countries.

   

Manufactured under license from Dolby 

Laboratories. Dolby and the double-D symbol 

are trademarks of Dolby Laboratories.

 is a trademark of SRS Labs, Inc.

TruSurround XT technology is incorporated 

under license from SRS Labs, Inc.

SRS TruSurround XT

®

 creates a truly 

immersive surround sound experience with 

rich bass and clear dialog from only two 

speakers.

   

ENERGY STAR

®

 is a joint program of the U.S. 

Environmental Protection Agency and the 

U.S. Department of Energy helping us all save 

money and protect the environment through 

energy efficient products and practices.

Consumer Notice:

This TV has been set to maximize energy efficiency while delivering the 

best possible picture using the factory installed home mode settings.

Changing or enabling other features in this TV (e.g. brightened 

backlighting) will possibly increase energy consumption beyond the 

original ENERGY STAR

®

 qualified limits.

Portions of this software are copyright © The FreeType Project 

(www.freetype.org).

The American Academy of Pediatrics discourages television viewing 

for children younger than two years of age.

Содержание 22PFL4507







































Отзывы: