manualshive.com logo in svg

Philips 221TE2LB/00, Руководство по обслуживанию

Поделиться
Скачать
Philips 221TE2LB/00 Скачать руководство пользователя страница 93

© MMD 2010 

 

Page 30 of 45

221TE2L  LCD

93

General Product Specification

4.4.8.2 UNDELETE 

A service that was deleted by the end user can be undeleted. The service shall be restored at the 
original preset number that was assigned at the time the service was deleted. When this original 
preset number is not free (assigned to another service) then a new preset number is assigned to the 
undeleted service as specified in the SSA 

4.4.8.3 MOVE 

A service can be moved by assigning another preset number to the service. Two different situations 
occur:
1. 

The preset number the service must be moved to is free (not assigned to a service). In this 

case the service is moved to the new preset number and the original preset number is now free. 
2. 

The preset number the service must be moved to is not free (assigned to another service). In 

this case the services are swapped. 
When a service is moved to another preset number and a service update installation wants to install 
a new service at this preset number (because this new service has an LCN equal to this preset 
number) then the service that was moved remains at this preset number. The new service is installed 
as if it has no LCN. Only after a re-installation or a SORT operation (see below) the manual move is 
undone and all services will be sorted on LCN. 

4.4.8.4 SORT 

A user selectable service list can be automatically sorted. All services in the user selectable service 
list that are not deleted (see above) are reassigned to their initial preset number (as if it was a re-
installation) as specified in  
Deleted services are invisible to the end user and are not assigned to a preset number. It is still 
possible to undelete a deleted service as specified in 

[UNDELETE]

4.4.8.5 FAVORITE 

ON/OFF 

Each service in a user selectable service list can be tagged as 'favourite'. When the 'Favourites' 
option is enabled (a User Interface option) service navigation using the P+ and P- commands shall 
only select the services tagged as 'favourite'. Selection of services not tagged as 'favourite' remains 
possible by digit entry. A first time installation and a re-installation shall erase all 'favourite' tags. A 
service update installation shall keep the 'favourite' tags unchanged. Favourite tags are linked to the 
service and not to the preset number. 

4.4.9  Sorting the Found Services 

Unified countries are counties that support multiple ONID’s. Unified countries are: 

x

 Austrialia 

x

 Italy 

x

 Ireland 

x

 Greece 

x

 Spain 

All other countries are not unified countries, meaning that they have just single ONID.  

Содержание 221TE2LB/00
























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды