Re-programming Analog DDC
TVI_TOOL
OPEN
Step 1: After initialize the alignment fixture, connecting all
cables as shown in Fig.10.
Step 2: Connect the power code of monitor and power on it.
Step 3: Double check the
icon
to run the TV_TOOL.exe.
Step 4: Click the
icon at the main menu
to open the DDC files.
Step 5: Select the icon of DDC IC type and
serial number write-in method.
Step 6: Entering the monitor’s serial number into the block
as shown in following photos, program will running
Automatically.
Step 7: When the DDC data download into the DDC IC, a
dialog box will be appeared automatically as shown
in below photos.
Step 8: Press the OK button, waiting for several seconds
and then power off the monitor.
18
220VW8 LCD
Fig.1 (Installation interface)
Fig.2
Fig.3
Fig.4
5
Fig.6
7
Fig.8
Fig.9
Fig.
Fig.
Fig. 10
PC
Monitor(A)
Monitor (B)
T
o
graphics
card
T
o
LPT1
port
T
o
monitor
ISP
T
OOL
Electronic Instruction
