6
Operating instruction
Installation
When there is no signal input to the TV, you
may encounter instability of the screen display.
In this instance, please use the
key to select
an AV channel.
The
Language
feature is used to change the
display language for menus.
&
Press the
MENU
key.
é
With the cursor, select the
Install
menu
and follow by the
Language
.
“
Use the
key to select a language of
your choice.
‘
To quit the menus, press
.
&
Press the
MENU
key.
é
With the cursor, select the
Install
menu
and follow by the
Auto Store
.
All the available TV channels will be stored.
This operation takes a few minutes. The
display shows the progress of the search and
the number of channels found.
At the end of the search, the menu
disappears.
To exit or interrupt the search, press
MENU
.
If no channels are found, consult the possible
solutions on “TIPS” page.
(applicable to certain TV models only)
(applicable to certain TV models only)
This menu is used to store all available
channels automatically.
You can select Auto, Antenna or Cable modes
with this menu.
&
Press the
MENU
key.
é
With the cursor, select the
Install
menu
and follow by the
Tuner Mode
.
“
Use the
key to select either Auto,
Antenna or Cable
‘
To quit the menus, press
.
Language
Tuner Mode
(On screen display may differ from actual TV)
Auto Store
p3-7
12/28/04, 10:52 AM
6
