11
8
7
9
0
Á
Ø
Make the connections as shown opposite.With the
n
key,
select
EXT2
or
S-VHS2
(S-VHS signals from the EXT2 socket).
For a monophonic device, connect the audio signal to the AUDIO L
input.The sound automatically comes out of the left and right
speakers of the set.
Headphones
When headphones are connected, the sound on the TV set will
be cut.The
@
P
#
keys are used to adjust the volume level.
The headphone impedance must be between 32 and 600 Ohms.
Side connections
L
R
Audio
in
*
Video
in
S
Video
Connecting peripheral equipment
The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.
Video recorder (or DVD recorder)
Carry out the connections shown opposite, using a good
quality euroconnector cable.
If your video recorder does not have a euroconnector socket, the
only connection possible is via the aerial cable.You will therefore
need to tune in your video recorder's test signal and assign it
programme number 0 (refer to manual store, p. 7).
To reproduce the video recorder picture, press
0
.
Video recorder with decoder
Connect the decoder to the second euroconnector socket of
the video recorder.You will then be able to record scrambled
transmissions.
Video recorder
Satellite receiver, decoder, DVD, games, etc.
Make the connections as shown opposite.
To select connected equipment
Press the
n
key to select
EXT1
and
EXT2
and
S-VHS2
(S-VHS
signals from the EXT2 socket).
Most equipment (decoder, video recorder) carries out the switching itself.
Other equipment
FM ANT
:
EXT1
VCR
EXT1
