manualshive.com logo in svg

Philips 201P10-00H, Руководство пользователя, Страница: 2 / 93

Поделиться
Скачать
Philips 201P10-00H Скачать руководство пользователя страница 2

Safety and Troubleshooting Information

Safety Precautions and Maintenance

 • 

Troubleshooting

 • 

Regulatory Information

 • 

Other

Related Information

Safety precautions and maintenance

WARNING: Use of controls, adjustments, or procedures other than those
specified in this documentation may result in exposure to shock, electrical
hazards, and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor:

Disconnect the monitor from the power supply if the monitor is not to be used for an extended period
of time.

●   

Do not attempt to remove the back cover, as you will be exposed to a shock hazard. The back cover
should only be removed by qualified service personnel.

●   

Do not place objects on top of the monitor cabinet, objects could fall into vents or cover them and
prevent proper cooling of the monitor's electronic devices.

●   

To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain or
excessive moisture.

●   

Do not use alcohol or ammonia-based liquid to clean the monitor. If necessary, clean with a slightly
damp cloth. Disconnect the monitor from the power supply before cleaning.

●   

Consult a service technician if the monitor does not operate normally when operating instructions of this
manual are followed.

 

RETURN TO TOP OF THE PAGE

Safety & Troubleshooting

file:///D|/rita/LF2/LF2/LFa1/multi_manual/english/201P/SAFETY/SAFETY.HTM [8/29/2001 3:14:00 PM]

Содержание 201P10-00H






























































































Отзывы:

Нет отзывов