Philips 20-3D2W01, Руководство пользователя

Страница: 11 / 22

20” Display User Manual
3D Solutions
01 April 2009
©2009 Philips Electronics Nederland B.V. 11 of 22
o
When positioning the display, make sure the power plug and outlet are easily
accessible.
o
IMPORTANT: Always display alternating content with your application. If a still image in
high contrast remains on the screen for an extended period of time, it may leave an
‘after-image’ or ‘ghost image’ on the front of the screen. This is a well-known
phenomenon that is caused by the shortcomings inherent in the LCD technology. Be
aware that the after-image symptom cannot be repaired and is not covered under
warranty.
3.3
Installation locations
o
Avoid exposure to heat and extreme cold.
o
Do not store or use the product in locations exposed to heat, direct sunlight or extreme
cold.
o
Avoid moving the product between locations with large temperature differences.
Choose a site that falls within the following temperature and humidity ranges.
•
Temperature: 0-35°C
•
Humidity: 20-80% RH
o
Do not subject the product to severe vibration or high impact conditions. Do not place
the product inside a car or boot.
o
Take care not to mishandle this product by either knocking or dropping during
operation or transportation.
o
Do not store or use the product in locations where there is a high level of humidity or in
dusty environments. Do not allow water or other liquids to spill on or into the product.
3.4
Positioning the display
The display can be integrated (see chapter 11 for drawings), placed on a table stand or wall-
mounted. With the desktop model the table stand is supplied; for wall mounting VESA mount
points are provided on the frame mount. See the VESA 100x100 standard for the way of
mounting.
For the best results, choose a position where light does not fall directly on the screen, and at
some distance away from radiators or other sources of heat. Leave a space of at least 10 cm
all around the display for ventilation, making sure that curtains, cupboards etc. cannot obstruct
the airflow through the ventilation apertures. The display is designed for use in public areas
only and should never be operated or stored in excessively hot or humid atmospheres.
3.5
Fitting the table stand
Use only the table stand provided with the set, making sure that the fixings are properly
tightened. Avoid using other table stands as they have not been tested in combination with the
weight of the display.