更多难得资料请到江南家电维修论坛免费下载！
http://bbs.520101.com
71 Meridian 1
4 Visual
characteristics
4.1 Test conditions
Unless otherwise specified, this specification is defined under the following conditions.
As defined in 3.3, 1440*900
(1) Input signal:
non-interlaced mode (1440*900@60Hz 140MHz), signal sources must have
75 ohm output impedance
(2) Luminance setting:
controls to be set to 300 nits with full screen 100 % duty cycle white signal
(3) Warm up:
More than 30 minutes after power on with signal supplied.
(4) Ambient light:
400 -- 600 lux
(5) Ambient temperature:
20 ± 5
°
C
4.2 Brightness
To follow Panel specification
4.3 Image size
Actual display size: Refer to
2.1
LCD PANEL spec.
4.4 Brightness uniformity
Set contrast at 100% and turn the brightness to get average above 300 nits at centre of the screen. Apply the Fig 1;
it should comply with the following formula:
B_min
X
100%
>
75%
(Follow
panel
spec)
B_max
Where B_max =Maximum brightness
B_min = Minimum brightness
4.5 Check Cross talk(s)
Apply Pattern 2. Set contrast and brightness at 100 %. Measure YA. Then output Pattern 3 and measure YB. The
cross talk value:
ABS
(YA
-
YB)
⎯⎯⎯⎯⎯⎯⎯⎯⎯
X 100% < 1.5 %
YA
4.6 White Color adjustment
There are three factory preset white color 9300K, 6500 and sRGB align by FGA function.
Apply full gray 64 pattern, with brightness in 100 % position and the contrast control at 50 % position.
The 1931 CIE Chromaticity (color triangle) diagram (x, y) coordinate for the screen center should be:
Product specification
CIE coordinates
(x,y)
9300K
x = 0.283 ± 0.015
y = 0.297 ± 0.015
6500K/sRGB
x = 0.313 ± 0.015
y = 0.329 ± 0.015
sRGB
x = 0.313 ± 0.015
y = 0.329 ± 0.015
Содержание 190V1SB/00
Страница 27: ...更多难得资料请到江南家电维修论坛免费下载 http bbs 520101 com 27 Meridian 1 ...
Страница 30: ...更多难得资料请到江南家电维修论坛免费下载 http bbs 520101 com 30 Meridian 1 7 3 Key Board 715G3016 1A 1 6 6 6 6 6 5 5 5 5 5 ...
Страница 58: ...更多难得资料请到江南家电维修论坛免费下载 http bbs 520101 com 58 58 Meridian 1 15 Monitor Exploded View ...
