Philips 190E2FB/00 (AP), Руководство по обслуживанию

Страница: 72 / 90

ʳʳʳʳʳ
ʳ
ʳ
0.1 190E2plus 19” Wide 16x10 LCD Monitor
2010/06/10 PHILIPS 21 of 30
72 190E2 LCD
General Product Specification
5.5 Location of Control icons -
Per Philips Graphic sheet
5.6 Color for resin/paint -
Per Philips make-up sheet
5.7 Fire enclosure request-
Shielding Cover should fulfill international standard
5.8 Resins
x
RoHS required
x
WEEE required.
x Resin type/selection refer to Project Book Section 7.2 Plastic material.
5.9 If paint is used
x
RoHS required
x
WEEE require
x If new painting type need to implement, refer to UN-D 1235.
5.10 Plastic mold tooling
x
Tooling to be designed to minimize cosmetic defects induced by molding process (sink,
blush, weld lines, gate marks, ejector marks, etc.). Refer to “TYV61-90007”.
x
Painting to cover up cosmetic defects due to molding is strongly discouraged.
x
China RoHS mark requested.
5.11 Plastics flammability
x All Plastics to be Flame Retardant UL 94-HB or Better.
x
Base / Pedestal to be Flame Retardant UL 94-HB.
x
All major plastic parts (bezel, back cover) need to be molded from same resin.
x
Plastic resin type selection should be referred to “plastic-Philips Pool monitor”.
5.12 Texture/Glossing of housing
x The texture area and texture no should follow Philips make-up sheet.
x The exterior surfaces shall have a uniform texture.