Philips 180MT, Руководство пользователя

Страница: 47 / 100

An after-image remains after the power
has been turned off.
This is characteristic of liquid crystal and is not caused by a
malfunction or deterioration of the liquid crystal. The after-image will
disappear after a set amount of time
●
Green, red, blue, dark, and white dots
remains
The remaining dots are normal characteristic of the liquid crystal
used in today’s technology.
●
Visible brighter spots in dark scenes
The brighter spots are normal when the ambient light is very low.
●
Increase the ambient light which makes the spots invisible
●
TV and Audio Problems
Poor TV signal reception
The proximity of mountains or high buildings may be responstible for
ghost pictures, echoing or shadows. In this case, try manually
adjusting your pictures: see"fine tuning" or modify the orientation of
the outside aerial. Does your attenna enable you to receive
broadcasts in this frequency range (UHF or VHF band)? In the event
of difficult reception (snowy pictures) switch the NR on the PICTURE
menu to ON.
●
No TV picture
Have you connected the aerial socket properly? Have you chosen
the right system? Poorly connected SCART cables or aerial sockets
are often the cause of picture or sound problems (sometimes the
connectors can become half disconnected if the Monitors set is
moved or turned). Check all connections.
●
No sound
Ensure that the audio cables are firmly connected to both the audio
input connectors on your Monitor and audio output connectors on
your PC or Video players.
●
If on certain TV channels you receive a picture but no sound, this
means that you do not have the correct TV system. Modify the
SYSTEM setting.
●
For further assistance, refer to the Consumer Information Centers list to contact your local Philips distributor.
RETURN TO TOP OF THE PAGE
Troubleshooting
file:///D|/TV/english/180mt/safety/saf_troub.htm (2 of 2) [6/4/2002 10:54:34 AM]