Philips 170M4FS/00, Руководство по обслуживанию, Страница: 72 / 83

Go to cover page
DDC Instructions
72
Step 7: Save DDC data
Sometimes, you may need to save DDC data as a text file for using
in other IC chip. To save DDC data, follow the steps below:
1. Click (Save) icon (or click "file"-> "save as") from the tool bar
And give a file name as shown in Fig. 25.
The file type is EDID45.1 file (*.ddc) which can be open in WordPad.
By using WordPad, the texts of DDC data & table (128 bytes, hex
code) can be modified. If DDC TEXTS & HEX Table are completely
correct, it can be saved as .ddc flie to re-load it into DDC IC for DDC
Data application.
2. Click . Save
Step 8: Exit DDC program
Pull down the File menu and select Exit as shown in Fig. 26.
Step 6: Write DDC data
1. Configuration should be as Fig. 24. And press OK.
2. Click (Write EDID) icon from the tool bar to write DDC data.
Bring up "Writing 0%~100%, ready" a progressing bar on the left
down corner.
3. ,Click
(Read EDID) to confirm it.
Need to reconnect the main power cable immediately
Fig. 24
Fig. 26
Fig. 25
170T4-DDC
C:\My documents\170T4-DDC
Edid45 Files
170T4