57
109B2 GS3 CM25
Go to cover page
Forward
Back
12
CM25 109B2 97KHz
TYPE
: 109B20/00C
BRAND : PHILIPS
8639 000 10534
00-06-15
cc Liao
00-06-21
25
590
General Specifications (Continued)
4.2
Image size (Factory pre-set modes only)
The dimensions of guaranteed display area to be measured
along the picture center of horizontal and vertical axis
of the screen as listed below: (preset modes only, refer
to fig. 1/fig 2)
Width
: 355 +/- 3 mm .(fig 1)
Height
: 265 +/- 3 mm .(fig 1)
4.3
Image centering deviation (Factory mian preset modes only)
With respect to fig. 2, the target relationships are
the following :
|A - B| <= 6 mm
|C - D| <= 6 mm
Note : This centering is adjustable by the end-user.
4.4 Picture shift control range
H-shift range
: 10 mm min. (+/- 3mm,from center to each side)
V-shift range
: 8 mm min. (+/- 2mm,from center to each side)
4.5 Picture tilt
With respect to Fig. 3, Tilt to be measured on extremes
of center line from bezel.
Tilt
: < = 2 mm
4.6 Geometric distortions
It is acceptable that pincushion, trapezoid, rhomboid,
rotation and various waves distortions must remain within
the limits of tolerance as in fig. 4,
3.5mm
The waviness of any vertical or horizontal shall be less
than 1.0 mm over a 50 mm distance.
|A| , |B|
2.0mm
|C| , |D|
2.0mm
|A + B|
3.5mm
|C + D|
