55
107P2 CM 25 GSIII
GENERAL PRODUCT SPECIFICATION
CM25-17" 107P2 92KHz AR CRT
TYPE
: 107P20/00H
BRAND : PHILIPS
8639 000 10649
00-06-07
00-06-07
590
11
23
K.C. Huang
4.0
Display image (CRT facing east)
The monitor is aligned in a magnetic cage having the
following magnetic field components :
Northern Hemisphere : H = 0, V = +0.43
±
0.05G, Z = 0
Southern Hemisphere : H = 0, V = -0.52
±
0.05G, Z = 0
Conditions for visual testing, unless otherwise stated:
Input video signal
- 700 mVp-p cross hatch
Brightness control
- 50%
Contrast control
-Adjusted to 31+5 -3FL of luminance
with full white pattern
4.1 Display resolutions
See 3.1.3
4.2 Image size (Factory pre-set modes only)
The dimensions of guaranteed display area to be measured
along the picture center of horizontal and vertical axis
of the screen as listed below: (preset modes only, refer
to fig. 1/fig 2)
Width
: 306 +/ - 3 mm .(fig 1)
Height
: 230 +/ - 3 mm .(fig 1)
4.3 Image centering deviation (Factory preset modes only)
With respect to fig. 2, the target relationships are
the following :
|A - B| <= 5 mm
|C - D| <=5 mm
Note : This centering is adjustable by the end -user.
4.4 Picture shift control range
H-shift range
: 20 mm min. (+/- 5mm,from center to each side)
V-shift range
: 10 mm min. (+/- 2mm,from center to each side)
4.5 Picture tilt
With respect to Fig. 3, Tilt to be measured on extremes
of center line from bezel.
Tilt
: < = 2 mm
