Philips 107E51/87 страница 12 Скачать руководство пользователя | Manualshive

Страница: 12 / 81

background image

12

OSD Adjustments (Continued), Troubleshooting

Go to cover page

V20 107E5

Smart Help

After returning to MAIN CONTROLS . . .

. . . to exit completely, press the

button.

CLOSE MAIN CONTROLS

Monitor Specific Troubleshooting
Self-Test Feature Check (STFC)

NO SIGNAL INPUT

Your monitor provides a self-test feature that allows you to check
whether your monitor is functioning properly. If your monitor and
computer are properly connected but the monitor screen remains
dark, run the monitor self-test by performing the following steps:
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer.
3. Turn on the monitor.

If the monitor is functioning properly, you will see a OSD
message as shown in the following illustration:

This box also appears during normal system operation if the
video cable becomes disconnected or damaged. This box
will remain on for one minute, go off five seconds, then on for
one minute, and will repeat cycle.
1. Turn off your monitor and reconnect the video cable;

then turn on both your computer and the monitor.

2. While in self-test mode, the LED remains green and the

pattern remains on and stationary.

If your monitor screen still remains dark after you use the
previous procedure, check your video controller and computer
system; your monitor is functioning properly.

If there is something wrong with the input signal, a message
appears on the screen although the power indicator LED is
still on. The message may indicate that the monitor is NO

SIGNAL INPUT or that you need to check the signal cable.

NO SIGNAL INPUT

ATTENTION

ATTENTION

CHECK SIGNAL CABLE

ATTENTION

DEGAUSS

EXTRA CONTROLS is a set of three features, including DEGAUSS.

Degaussing removes electromagnetic build up that may distort the color

on your screen.
1) Press the

button on the monitor. The MAIN CONTROLS window

appears.
2) Press the button until EXTRA CONTROLS is highlighted.

3) Press the

button. The EXTRA CONTROLS window appears.

ADJUST MOIRE will be highlighted.

5) To degauss your screen, press the

button. Your screen will be

degaussed, then the MAIN CONTROLS window will reappear. CLOSE

MAIN CONTROLS will be highlighted.

4) Press the button until DEGAUSS is highlighted.

http://jdwxzlw.5d6d.com/?fromuser=华盛维修

家电维修资料网，免费下载各种维修资料

«
...
10
11
12
13
14
...
»

Содержание 107E51/87


















































































Отзывы:

Нет отзывов

Похожие инструкции для 107E51/87

10.4" TFT LCD Ceiling Monitor

Бренд: Farenheit Страницы: 11

Бренд: Evolveo Страницы: 9

Бренд: YOKOGAWA Страницы: 35

Бренд: Chauvet Professional Страницы: 41

PrecisionSensor Pro BP 2590 Instructions

Бренд: Braun Страницы: 66

Бренд: Mace Страницы: 2

Бренд: Rydeen Страницы: 5

Бренд: I-Tech Страницы: 30

Бренд: Wachendorff Страницы: 15

Бренд: Dahua Страницы: 6

Бренд: ViewSonic Страницы: 2

SyncMaster 900NF

Бренд: Samsung Страницы: 88

SyncMaster 9 Series

Бренд: Samsung Страницы: 74

SyncMaster 770TFT, 870TFT, 170T

Бренд: Samsung Страницы: 30

SyncMaster 323T

Бренд: Samsung Страницы: 78

Бренд: Steren Страницы: 12

Бренд: BabySense Страницы: 11

Бренд: BabySense Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды