Philips 107E страница 73 Скачать руководство пользователя

Страница: 73 / 110

Regulatory Information

WARNING - THIS APPLIANCE MUST BE EARTHED.

Important:

This apparatus is supplied with an approved moulded 13A
plug. To change a fuse in this type of plug proceed as
follows:

1. Remove fuse cover and fuse.

2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or
BSI approved type.

3. Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it
should be cut off and an appropriate 3-pin plug fitted in its
place.

If the mains plug contains a fuse, this should have a value
of 5A. If a plug without a fuse is used, the fuse at the
distribution board should not be greater than 5A.

Note: The severed plug must be destroyed to avoid a
possible shock hazard should it be inserted into a 13A
socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured in accordance
with the following code:

BLUE - "NEUTRAL" ("N")

BROWN - "LIVE" ("L")

GREEN & YELLOW - "EARTH" ("E")

1. The GREEN AND YELLOW wire must be connected to
the terminal in the plug which is marked with the letter "E"

or by the Earth symbol

or coloured GREEN or GREEN

AND YELLOW.

file:///D|/EDFU/crt_17_6/edoc/english/107E/SAFETY/regs/regulat.htm (14 of 15)2005-04-08 ¤W¤È 11:21:49

Содержание 107E















































































































Результаты поиска

Содержание 107E

Отзывы:

Похожие инструкции для 107E

Бренды по названию

Популярные бренды

Philips 107E, Руководство пользователя

Результаты поиска

Содержание 107E

Отзывы:

Похожие инструкции для 107E

Бренды по названию

Популярные бренды