background image

Philips service organization will attempt to provide service (although there may be a delay if the appropriate
spare parts and technical manual(s) are not readily available).

 

Where CAN I GET MORE INFORMATION?

For more information, contact the Philips Customer Care Center by calling

 (877) 835-1838 (U.S.A.

customers only)

 or 

(402) 536-4171

.

Before Requesting Service...

Please check your owner's manual before requesting service. Adjustments of the controls discussed there
may save you a service call.

 

TO GET WARRANTY SERVICE IN U.S.A., PUERTO RICO OR U.S. VIRGIN ISLANDS...

Contact the Philips Customer Care Center phone number listed below for product assistance and
procedures for servicing:

Philips Customer Care Center

(877) 835-1838 or (402) 536-4171

(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties, including implied warranties of
merchantability and fitness for a particular purpose, are limited in duration to the duration of this express
warranty. But, because some states do not allow limitations on how long an implied warranty may last, this
limitation may not apply to you.)

 

TO GET WARRANTY SERVICE IN CANADA...

Please contact Philips at:

(800) 479-6696

Three years free parts and three years free labor will be provided at Philips Canada depot or any one of its
authorized service centers.

(In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or
implied, including any implied warranties of merchantability or fitness for a particular purpose. Philips is not
liable under any circumstances for any direct, indirect, special, incidental or consequential damages,
howsoever incurred, even if notified of the possibility of such damages.)

 

REMEMBER...

 

Please record the model and serial numbers found on the product below.

MODEL # ________________________________________________

SERIAL # ________________________________________________

 

This warranty gives you specific legal rights. You may have other rights which vary from state/province to
state/province.

United States Guarantee

file:///D|/EDFU/crt_17/edoc/english/WARRANTY/WAR_USA.HTM (2 of 3) [2003/11/3 ?? 01:41:17]

Содержание 107B5




















































































































Отзывы: