Frequently Asked Questions
●
Reset your monitor via the OSD menu
●
Adjust the Horz (width) and/or Vert size (height) in the OSD
●
Change monitor timing to work at the recommended resolution
18. The edge of the picture on the screen appears to be distorted. How can I
correct this?
Please perform the following to correct the picture image:
●
A magnetic or electrical interference typically causes poor geometry in the picture.
Place the monitor in a different physical location
●
Reset the monitor to the factory preset via the OSD menu
●
Access the Geometry Menu in the OSD of the Monitor and perform the necessary
adjustments
●
Change the monitor timing to the recommended resolution
19. The picture appears too dim. How can I correct this?
Adjust Brightness and/or Contrast via the monitor 's OSD. Some models have a Video
Input Select
under Advanced Controls in the monitor 's OSD. Most computers require it to be set at
0.7V.
Please review the following for possible solutions:
file:///C|/Documents%20and%20Settings/lynn/My%20Documents/CD%20manual/multi_manual/ENGLISH/faq.htm (7 / 9) [2004/9/24 ÿdUÿdÿˆ 11:44:23]