ENGLISH
C
3
Clean the trimmer with the short-bristled
side of the brush supplied. Brush up and
down along the trimmer teeth.
4
Turn the trimmer ON and OFF. Repeat
step 3.
5
Lubricate trimmer teeth twice a year with
one drop of mineral oil.
C
6
Push the trimmer slide switch backward to
retract the trimmer.
Replacing Razor Head Assembly
◗
Replace the entire Razor Head Assembly once
a year for optimal shaving results.
◗
Replace damaged or worn Razor Head
Assembly with model RQ10 Philips Norelco
razor heads only.
◗
The individual shaving heads (cutters and
combs) are NOT removable/replaceable. Only
the one-piece Razor Head Assembly can be
replaced.
Replacement Razor Head Assembly
Indication
C
◗
The replacement head indicator symbol starts
blinking (model 1090X only, you will also hear
a beep) to remind you to check if it’s time to
26
ENGLISH
replace your Razor Head Assembly to obtain
optimal shaving results.
C
1
Remove the Razor Head Assembly from
the razor by pulling the Razor Head
Assembly straight up away from the razor.
C
2
Place new Razor Head Assembly back on
the razor and push down (you will hear a
click).
The Razor Head Assembly will only fit correctly
in one position on razor. Make sure to align the
raised notch on the Razor Head Assembly (
1
)
with the slot inside the top of razor (
2
).
This razor and charging stand/power pod have no
other user-serviceable parts. For assistance call
1-800-243-3050.
Maintenance
◗
Always remove razor from the charging stand/
power pod before cleaning appliance.
◗
Unplug the charging stand/power pod after
charging/recharging razor. The charging stand/
power pod and razor may be wiped clean using
a damp cloth.
◗
Water from the tap should be on a warm
setting to clean any washable parts.
Note: DO NOT place or clean any parts of the
charging stand/power pod in a dishwasher.
27
