Philips Saeco HD8753/11, Руководство по эксплуатации

Страница: 27 / 60

ENGLISH
25
Gr
een
Y
ello
w
Gr
een
6
Once the milk dispensing procedure is complete, the machine begins
the coff ee brewing phase. The “ STOP ” message is displayed.
Press the “ ” button when the desired amount of coff ee is reached in
the cup.
Now the " " button has been programmed; each time it is pressed and
released, the machine will brew the same amount that has just been set.
Hot Milk
The following steps describe how to prepare hot milk.
Dispensing may be preceded by short sprays of milk and steam. Risk of
burning. Wait for the end of the cycle before removing the container.
Refer to the section "Milk Carafe".
1
Fill the carafe with the desired quantity of milk.
Note: To ensure better results when preparing a hot milk, use cold milk.
2
Open the milk dispenser and insert the milk carafe into the machine.
3
Place the cup for hot milk under the carafe dispenser.
Note: Ensure that the cup is positioned correctly under the dispenser to avoid
spilling the product.
Gr
een
7
The machine pours a preset quantity of hot milk into the cup. The
pouring may be stopped early by pressing the “ ” button.
After using the milk carafe to prepare the desired milk, wash it as described
in the "Cleaning and Maintenance" chapter.
4
Press the " " button. The following icon is displayed.
5
Press the “ ” button to start hot milk dispensing.
Note: Wait for the cycle to end before removing the container.
6 The following icon is displayed during the preheating time required by
the machine.