PHILIPS Respironics Nuance, Руководство пользователя

Страница: 10 / 24

4
Achieving the Right Fit
Note: Do not overtighten the straps.
Before putting on the mask
1. Sizing: Place the pillows cushion tips
A
into your nostrils .
2. Choose the cushion so the pillows gel bases
B
sit comfortably under the nose
without any gaps.
Note: Do not push the pillows gel bases into your nostrils.
Putting on the Mask
3. Headgear: Pull the headgear on over your head .
4. Pillows: Insert the pillows cushion tips
A
into your nostrils .
Adjusting the Mask
5. Headgear: Adjust the crown strap
K
. The headgear should sit just above the
ears similar to glasses.
Warning: The mask parts should be away from your eyes. Loosen the crown
strap
K
to move the frame side straps
I
away from your eyes.
6. Frame: Peel the tabs
I
away from the straps, adjust the length evenly, then press
the tabs against the straps to reattach .
The mask should rest comfortably against your face .
Tube Management (Optional)
7. Slip the mask tube
F
through the headgear tube management loop
L
.
8. Position the mask tubing over your head and away from your eyes.
Using the Mask
9. Connect the flexible tubing (included with your CPAP or bi-level device) to the
swivel
G
.
10. Turn the therapy device on. Lie down. Breathe normally.
11. Assume different sleeping positions. Move around until comfortable. If there are
any excessive air leaks, make final adjustments. Some air leaking is normal.
Comfort Tips
‡
The most common mistake is overtightening. The mask should fit loose and
comfortable. If your skin bulges around the mask or if you see red marks on your
face, loosen the straps.
‡
Re-seat the mask by pulling it away from your face and gently setting back into
place.