SETUP CODES FOR TELEVISION
CÓDIGOS DE PROGRAMACIÓN PARA TELEVISIÓN
CODES DE PROGRAMMATION DU TÉLÉVISEUR
A-Mark
0032
AOC
0032, 0048, 0059, 0214
Admiral
0122, 0492
Adventura
0075
Aiko
0121
Akai
0059
Alaron
0208
Ambassador
0206
America Action
0209
Ampro
0780
Anam
0209
Anam National
0084
Archer
0032
Audiovox
0032, 0121, 0209, 0480, 0652
Baysonic
0209
Belcor
0048
Bell & Howell
0045, 0183
Bradford
0209
Brockwood
0048
Broksonic
0032, 0265, 0492
CXC
0209
Candle
0059, 0075, 0085
Carnivale
0059
Carver
0083
Celebrity
0029
Cineral
0121, 0480
Citizen
0059, 0068, 0075, 0085, 0089,
0121, 0309
Clairtone
0214
Concerto
0085
Contec
0209, 0214
Craig
0209
Crosley
0083
Crown
0068, 0209
Curtis Mathes
0045, 0059, 0068, 0076, 0080,
0083, 0085, 0089, 0122, 0174,
0183, 0195, 0480, 0495
Daewoo
0048, 0068, 0121, 0480, 0652,
0653
Daytron
0048
Denon
0174
Dumont
0046, 0048
Dwin
0749, 0803
Electroband
0029, 0214
Emerson
0048, 0068, 0183, 0206, 0207,
0208, 0209, 0214, 0265, 0309,
0311, 0492, 0652, 0653
Envision
0059
Fisher
0183, 0188
Fujitsu
0208, 0712
Funai
0200, 0208, 0209
Futuretech
0209
GE
0050, 0076, 0080, 0084, 0122,
10
9
TROUBLESHOOTING
Red Indicator Light does not
blink when you press a key.
Replace the batteries with two
(2) "AA" alkaline batteries (see
Page 3).
The VOL+,VOL- and MUTE
keys are not functional.
Make sure that the volume con-
trol is locked to a component
that has volume capabilities and is
programmed into the remote
control.
Red Indicator Light blinks when
you press a key, but home enter-
tainment component does not
respond.
Make sure you are aiming the
remote control at your home
entertainment component and
that you are within 15 feet of the
component you are trying to
control.
The remote control does not
control home entertainment
components or commands are
not working properly.
Try all listed codes for the com-
ponent brand being set up. Make
sure all components can be oper-
ated with an infrared remote
control.
CH+, CH- and LAST do not
work for your RCA TV.
Due to an RCA design (1983-
1987), only the original remote
control will operate these func-
tions.
Changing channels does not
work properly.
If original remote control
required pressing ENTER to
change channels, to change chan-
nels, press ENTER on the
remote after entering a channel
number.
Tried Auto Scan and still could
not find a working code.
Try Auto Scan again after clearing
out the component key as fol-
lows: Press and hold SET until
Red Light blinks twice, then
release. Next enter 9-9-2. Then
press and release the component
key to be cleared twice.
NOTE:
To clear all set up codes and restore functions to Default,
press SET until red light blinks twice, release SET and enter 9-8-1.
Caution:When this clear feature is performed, please note that all of
your set up codes will be reset to the default codes and you will need
to reprogram components.
PROBLEM:
SOLUTION:
