Please read instructions before use and
retain for future reference.
The AVENT Express Microwave Steam
Steriliser uses the speed and convenience
of your microwave to sterilise baby feeding
equipment in minutes. As well as AVENT
breast and bottle feeding accessories, you
can sterilise any other items that are suitable
for microwave use and can be boiled. If in
doubt please contact the manufacturer.
• WARNING – FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY CAUSE DAMAGE
TO THIS PRODUCT AND/ OR YOUR
MICROWAVE.
•
Always add
200ml
of water before
each use.
•
Do not use bleach or chemical sterilising
solutions/tablets in this steriliser or on
products to be sterilised.
•
In combination ovens, ensure grill is
switched off and has cooled before use.
•
Always follow loading instructions and
do not overload.
•
Always allow at least 2 minutes cooling
time before removing from the microwave.
•
When taking the Steriliser out of the
microwave,
TAKE CARE
– it will still be hot.
•
Take care when removing lid as steam
will escape.
•
Do not carry steriliser using lid handle.
•
Always keep out of reach of small children.
Contents (see diagram A)
1)
Lid
a – Lid handle
b – Side catches for transport
2)
Bottle/Accessories Rack
a – Central Stem
b – ISIS Breast Pump slots
c – Dome cap holders
d – Crescent shaped holes
3)
Base
Before each use (See diagram B)
•
Wash all items in mild soapy water and
rinse thoroughly in unsoftened water.
•
Remove rack and pour 200ml of water
into the reservoir.
•
Put the rack back into the base.
When loading the Steriliser, always ensure
the items are positioned to allow effective
circulation of steam.
To load up to four 125ml or 260ml AVENT
Bottles (See diagram C)
•
Place the inverted bottles around the rack’s
central stem.
•
Place teats around the edge and slot dome
caps above the teats.
•
Place screw rings on their side in between
the dome caps.
To load 2 x 330ml AVENT bottles
(See diagram D)
•
Push the inverted bottles into the rack’s
crescent shaped holes so that they are
supported at an angle.
•
Arrange the screw rings, teats and dome
caps around the edge.
To load one VIA Feeding System and three
VIA cups & lids (See diagram E)
•
Place screw ring over the rack’s central
stem.
•
Place the inverted VIA cups around
the rack’s central stem.
•
Place teat on the rack edge and
slot the dome caps above the teat.
•
Place VIA adaptor and lids on their sides
around the rack edge.
To load the AVENT ISIS Breast Pump
(See diagram F)
•
Click the ISIS breast pump body into one
of the ISIS slots provided.
•
Arrange the other breast pump and bottle
or VIA components in the rack as shown.
To load up to four narrow neck bottles
(See diagram G)
•
Arrange the screw rings around the
rack’s central stem.
•
Push the inverted bottles into the rack’s
crescent shaped holes so that they are
supported at an angle.
•
Arrange teats, dome caps and sealing
discs around the edge.
AVENT Express Microwave Steam Steriliser
UK