2
Troubleshooting
Symptom
Cause of Failure
Recommendation
The dimmer does not
work and LED off
1.The dimmer is not
plugged into the
electrical outlet properly
2.The dimmer break
down
1.
Check power connections
2. Don’t open up the dimmer and send it for
repair.
The dimmer LED
illuminating, but cannot
control the ON/OFF
dimmer of the attached
load
Check if the load plugged
into the dimmer has its
own ON/OFF switch
Set the ON/OFF switch of the attached load
to ON.
The dimmer LED
illuminating, but the
detector cannot control
the dimmer
1. Not carry out
association
2. Same frequency
interference
1. Carry out association
2. Wait for a while to re-try
Screw lampholder Type:
Since the socket type for each country in Europe varies, refer to the outline for each
socket suited for each country as follows:
EU TYPE: PAD02-1
US TYPE: PAD02-2
Note:
Please make sure that the intensity of the screw lampholder of the electrical
device must be Maximum Load (Watt) and have same head as the enclosed screw
lampholder before inserting to the socket.