Customer Careline: 0901 293 0038
Calls are charged at £1 per minute from a BT landline. Call charges from other networks may vary
Support: http://technical.philex.com
STEP TWO
- ASSEMBLING THE TV MOUNTING PLATE
Fit the TV mounting plate to the tillting clamp as shown below. The nut should not be fully tightened until the installation
has been completed and the tilting angle of the television has been finalised.
STEP THREE
- FITTING THE TV MOUNTING PLATE
TO THE WALL BRACKET
Fit the TV mounting plate to the wall bracket as shown
below. Tighten the nut to secure the position. Finally fit
the dome caps to the screw head and nut to finish the
installation.
STEP THREE
- FITTING THE TV MOUNTING PLATE
Once you have checked the compatibility of your
television, locate the fitting holes on the mounting plate
that match your televisions mounting holes.
Check which type of the supplied fitting screws fit your
television (M4 or M5 - supplied) and attach the plate firmly
to the back of your television.
v2
