Aerial fl ylead
VCR
Satellite
Receiver
Satellite output lead
TV 2
(SLx2P only)
UHF (TV) Aerial
Aerial
fl ylead
Aerial fl ylead
Aerial downlead
TV 1
3
TV/ VCR /SAT
DISTRIBUTION
Satellite Dish
METHOD 3:
Satellite Receiver Signal Distribution
If you wish to distribute signals from a satellite receiver:
1. Connect your UHF aerial downlead into the satellite receiver’s UHF aerial input.
2. Connect the output lead from a satellite receiver to your amplifi er UHF input.
Signals from the receiver can now be watched on all TV sets connected.
3. Alternatively connect the satellite receiver output into your VCR.
4. Connect your VCR output as per METHOD 1. UHF TV, VCR playback and satellite
receiver signals will now be available to all TV sets connected.
5. Connect the outputs to all TV sets.
N.B.
It may be necessary to retune the output channel of your VCR when used with a satellite
receiver. Consult your VCR user guide for information.
Use of Gain Control
Gain Control is used to adjust amplifi cation for optimum signal strength (0~10db).
Setting up 3
