Phileas OPEN 5.00, Руководство пользователя

Страница: 6 / 24

The Spinacker Halyard
First of all install the spinnaker hound pulley
(#098) using the small end of the shackle
#RF634, then install the #’retenue de spi’ to
the
becket, 40cm above.
Be careful to leave the shackle turned
towards the outside in order no to damage
the mast(see photos).
The halyard is simply passed into the hound
pulley and comes down along the mast.
It is possible to use a Rilsan attach or an
elastic at the level of spreader to prevent
the spinnaker halyard from getting stuck
behind spreader.
Shrouding (haubannage)
The shrouds are fixed to the mast by a
shackle # HR08.
The forestay is fixed thanks to the swivel
attached to the HR08 fixed on the hound
shackle.
Nylon plastic washers have to be located
correctly, as shown in the photograph.
Tighten the shackles with pliers to make
sure that they are well fastened and if
possible assure the fixture with adhesive
tape or a small piece of rope.
Jib Halyard (drisse de foc)
The jib halyard goes simply into the swivel
hook (see photo).