Philco PLS 1061, Руководство пользователя

Страница: 16 / 96

EN - 14
02/2011 Copyright © 2011, Fast ČR, a. s.
Ending a program
• After the completion of a selected program the washing machine will automatically stop.
• The end of program indicator light will turn on.
• Turn the program selector by turning it to P (off ).
• After the program ends the washing machine's door safety lock will automatically disengage after about
2 minutes. You can open the door by pulling on the door handle towards yourself and take the laundry out
of the washing machine.
• After taking the laundry out of the washing machine, leave the door open so that the washing machine
can dry out.
• Disconnect the washing machine from the power socket.
• Shut off the water inlet.
WARNING!
If an electric power outage occurs during the course of a washing program and then within a short
time power is restored, the program will continue from the place where it was interrupted. This
event will not damage the washing machine.
If the electric power outage occurs during the course of a washing program and lasts a longer time,
then the door safety lock will disengage after 2 minutes. If there remains water inside the washing
machine, do not open the door. The water could fl ow out. If you need to take out the laundry, follow
the instructions described in part “Maintenance and cleaning” on page 16.
Child safety lock
Your washing machine is equipped with a child lock to prevent the changing the process of a program by
pressing a button during a wash. The child lock is activated by simultaneously pressing the fi rst and second
function buttons and holding them down for at least 3 seconds.
If the wash, rinse, and spinning indicator lights fl ash for about 2 seconds it means that the child lock has
been activated. To deactivate this function it is necessary to hold down the same buttons for longer than
3 seconds. If you press any button while the child lock function is activated, the pressed button will not be active
and the wash, rinse and spinning indicator lights will fl ash for 2 seconds. A soon as the function is cancelled, the
indicator lights will stop fl ashing. When a program has ended, the child lock function is automatically deactivated.