Philco PLD 14840, Руководство пользователя

Страница: 15 / 32

6.
Press button
4
to start the pro-
gramme. The indicator of button
4
is
on.
The drain pump can operate for a short
time when the appliance fills water.
The appliance adjust automatically the cy-
cle time to the laundry you have put in the
drum to have perfect washing results in
the minimum necessary time. After ap-
proximately 15 minutes from the start of
the programme, the display shows the
new time value.
Interrupt a programme
1.
Press button
4
. The indicator flashes.
2.
Press button
4
again. The washing
programme continues.
Cancel a programme
1.
Press button
1
to cancel the pro-
gramme and to deactivate the appli-
ance.
2.
Press button
1
again to activate the
appliance. Now, you can set a new
washing programme.
The appliance does not drain the wa-
ter.
Change a function
You can change only some functions be-
fore they operate.
1.
Press button
4
. The indicator flashes.
2. Change the function set.
Set the delay start
1.
Press button
5
again and again until
the display shows the number of mi-
nutes or hours. The related symbols
comes on.
2.
Press button
4
, the appliance starts
the countdown of the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button 4 to start the
appliance, you can cancel or change
the set of the delay start.
You cannot set the delay start with the
Steam programme.
Cancel the delay start
1.
Press button
4
. The related indicator
flashes.
2.
Press button
5
again and again until
the display shows 0’ .
3.
Press button
4
. The programme
starts.
SETTING AND STARTING A PROGRAMME
Open the door
While a programme or the delay start oper-
ates, the appliance door is locked.
To open the appliance door:
1.
Press button
4
. The door lock sym-
bol in the display goes off.
2. Open the appliance door.
3. Close the appliance door and press
button
4 . The programme or the de-
lay start continues.
If the temperature and level of the wa-
ter in the drum are too high, the door
lock symbol stays on and you cannot
open the door. To open the door do
the steps that follow:
1.
Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that no water is in the
drum.
Important! If you deactivate the appliance,
it is necessary to set the programme again.
At the end of the programme
At the end of the programme
• The appliance stops automatically.
• The acoustic signals operate.
• In the display comes on.
• The indicator of the Start/Pause button
4
goes off.
• The door lock symbol goes off.
15