Philco PHWK 2040 Скачать руководство пользователя страница 8

Страница: 8 / 52

EN - 6

09/2017

PART 4: KETTLE MODEL

Model No.

PHWK 2040

Rated voltage

220-240 V~50/60 Hz

Rated power

1850~2200 W

Capacity

1.7 l

Dimensions

228 × 151 × 254 mm

Weight

1.31 kg

PART 5: HOW TO USE

For the fi rst time to use or if not used for a long time, it is recommended that you fi ll to the maximum level
mark with fresh tap water, boil and empty the kettle at least 2 times to clear kettle of any tiny particles. Do not
drink such water.

Pull up the lid-handle, and the lid can open;

Remove the kettle from the base to the fi lling place. Fill the kettle with desired amount no less than the
minimum and not more than the maximum level. Put back the lid; place the kettle back on the base unit;

Connect the plug into a power outlet (220V, AC), no need to press any button while Led shows “100”;
LED of heating and LED of keep-warm won’t display;

Press once while LED of heating water shine, kettle turns into heating water model; Press one time again
while LED of Keep-warm; display shows, kettle turns into keep-warming model; Press one more time
again, kettle turns into OFF mode while Display light and 2 LEDs all won’t display;

Heating water mode: LED of heating water display shows while kettle starts to heating water as setted
temperature, Display shows the temperature of water, the default temperature of water is 100°C;

- Under standard atmosphere pressure, 8 seconds after water is heated at 97°C, kettle stops to heat.

While LED of heating turns off and Display shows 100°C; After 10 seconds, Display shows changing to
go down to show actual temperature of water;

- Under unnormal atmosphere pressure, kettle keeps heating water as temperature one degree for

20 seconds not increasing, above 85 °C. Then kettles turns off while LED of heating turns off and
Display shows actual temperature;

- In operation, Press ON/OFF button, then Kettle stops heating and system returns to standby status;

Keep-warm mode: LED of keep-warm shine and kettle keeps the water as set temperature;

After LED of keep-warm shows on display for 7 seconds while button doesn’t have operate, kettle turns
into keep-warm model. Range of keep-warm as 50-95°C, default temperature of keep-warm as 70°C
while water keeps during (+3°C, -5°C). When actual temperature of water is above set temperature,
The display shows set temperature; When actual temperature is lower than set temperature, display
shows actual temperature. In operation, press ON/OFF button, then kettle stops keep-warm and
returns to standby status. The time of keep-warm is 2 hours;

In standby status, press ”+” “-” button, kettle can modify the set temperature degree as 5°C one time; The
range of modifying temperature in standby model is 50°C-100°C;

To be keep-warm model through press ON/OFF button, display show “70” then press “+” “-” to modify
degree 5°C one time to set temperature. The range of temperature in keep-warm model is 50°C-95°C;