6
7
Revision 01/2016
Copyright © 2016, Fast ČR, a. s.
Copyright © 2016, Fast ČR, a. s.
EN
6. Take the blade assembly off the motor unit.
7. Turn the jar upside down so that the blade assembly (J) is on top and carefully take it off the jar (H).
Incorrect handling may result in the contents of the jar being spilled.
8. Now you may place the lid (I) on to the portable jar (H) and enjoy your prepared beverage, e.g. on your way
to work.
ATTENTION:
Do not leave the blender running for longer than 1 minute; majority of ingredients require only quick pulse
blending to achieve satisfactory results.
Whenever the appliance heats up while blending, turn it off, pull the power plug out of the power socket and
allow the blender to rest for at least 15 minutes before using again.
Under no circumstances should you go above the MAX mark. This risks overloading the appliance and
damaging it.
RECOMMENDATION:
To achieve an even consistency, always cut the ingredients into equal size pieces (approx. 1.5 x 1.5 cm).
PART 5: CARE AND CLEANING
Before cleaning, always make sure that the blender is turned off and the power plug is disconnected from the
power socket.
Take the blending jar off the body of the appliance and empty it. Pour clean water (about 0.5 L) into the
blending jar and close the lid. Place the blending jar on to the body of the appliance. Press and briefly hold
down button I or press it repeatedly. In this way you will release the remains of blended ingredients from the
blending jar and the blade assembly. (You can do the same with the portable jar and blade assembly.)
Disconnect the blender from the power socket. Ensure that the blending blades have come to a full stop. Remove
the blending jar from the body of the appliance and pour out the water. Use warm water and kitchen detergent
to clean the measuring cup, lid, blending jar, portable jar, lid of the portable jar and the blade assembly. Then
thoroughly rinse under flowing water and dry thoroughly.
Attention! The appliance's blending blades are sharp! When handling them, pay extra attention.
Clean the body of the appliance with a lightly damp cloth and dry it. Never submerge this part of the appliance
in water or in any other liquid.
Do not use any abrasive cleaning products, petrol or solvents to clean the appliance and its accessories.
Place the appliance in a clean, dry place out of reach of children.
PART 6: TECHNICAL SPECIFICATIONS
Rated voltage
220 – 240 V ~
Rated frequency
50/60 Hz
Power input
350 W
Operating time
Max. 1 minute
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED
PACKAGING MATERIALS
Dispose of used packaging material at a site designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that used electric or electronic products must
not be added to ordinary municipal waste. For proper disposal, renewal and recycling hand over
these products to determined collection points. Or as an alternative in some European Union states
or other European countries you may return your products to the local retailer when buying an
equivalent new product. Correct disposal of this product helps save valuable natural resources and
prevents damage to the environment caused by improper waste disposal. Ask your local authori-
ties or collection facility for more details. In accordance with national regulations penalties may be
imposed for the incorrect disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or supplier for the neces-
sary information.
Disposal in other countries outside the European Union
This symbol is valid in the European Union. If you wish to dispose of this product, request the nec-
essary information about the correct disposal method from the local council or from your retailer.
This appliance complies with EU rules and regulations regarding electromagnetic and electrical
safety.
Changes in the text, design and technical specifications may be made without prior notice and we reserve the
right to make such changes.
The original version is in the Czech language.
Address of the manufacturer: FAST ČR, a.s., Černokostelecká 1621, Říčany CZ-251 01
