Philco PHS 641 P, Руководство пользователя

Страница: 10 / 56

EN - 8
04/2013 Copyright © 2013, Fast ČR, a. s.
Residual heat indicator
The appliance is equipped with a residual heat function. If the temperature of the hotplate is higher than 50 °C
after it is turned off , the letter "H" will appear on the display, indicating the danger of a hot hotplate. Wait until
the indicator (letter H) turns off .
Timer function (available depending on the model)
The timer makes it possible to set the time after which the hotplate will automatically turn off in the range
from 1 to 99 minutes.
To activate the timer, fi rst using the / buttons set the power level for the hotplate for which you wish to
set the timer.
Now using the
/ buttons on the timer, set the time for which the selected hotplate will be in operation.
Confi rm using the or button on the selected hotplate.
The letter "t" will appear on the hotplate display and the timer display will start counting down the set time.
To can cel the timer you can either turn off the hotplate with the set timer, or simultaneously press the /
buttons on the hotplate and the buttons / on the timer.
Control panel lock
The appliance is equipped with a control panel lock function, which prevents accidental or undesirable
changes from being made on the hotplate control panel or the timer.
To activate the lock function, press and hold down the button until the lock indicator light is lit.
To deactivate the lock function, press and hold down the button until the lock indi cator light turns off .
When the lock is activated all the buttons will be turned off with the exception of the main power button.
If you turn off the appli ance using the main power button in the activated lock mode, the lock will remain
active until you cancel it.
Safety shutoff switch
This appliance is equipped with a safety shutoff switch, which automatically turns off the hotplates if they are
not turned off manually.
Power level Automatic shut off after (hours)
1 10
2 – 3 5
4 4
5 3
6 – 7 – 8 2
9 1