Philco PHEM 1050, Руководство пользователя

Страница: 28 / 168

26 Revision 10/2017 Copyright © 2017, Fast ČR, a. s.
EN
PART 8: DISPLAY INFORMATION
• This chapter will instruct you the information shows on the
screen and the solutions.
Causes Solutions
EMPTY TRAY
If the water drip tray is full, any
function of making beverage will be
out of service. Take the drip tray out, empty the
waste water in the drip tray and
reinstall it to the machine.
EMPTY GROUNDS
If the coffee grounds container is full,
any function of making beverage will
be out of service. Take the coffee grounds container
out, empty the coffee grounds
container and reinstall it.
FILL WATER TANK
If water in the water tank is used up,
any function of making beverage will
be out of service. Fill the water tank with water.
FILL BEANS
If coffee beans in the bean container
are used up, function of making
coffee will be out of service. Add beans into bean container, and
press any button to release.
LACK OF POWDER
There is not enough coffee powder
in the powder container. Next time when making coffee with
coffee powder, please put a full
spoon of powder.
INSTALL TRAY
The drip tray is not installed
correctly; any function is out of
service. Install the drip tray correctly.
UNIT EMPTY
The water in the pipe inside the
machine is not enough; any function
is out of service. Press any button to release to run
the water self-check system.
TEMPERATURE HIGH
Temperature of the machine is too
high, the machine cannot be used. Power off the main power, and use it
1 hour later.
TEMPERATURE LOW
Temperature of the machine is too
low, the machine cannot be used. Increase environmental temperature
to above 10°C.
PRESSURE HIGH
1. Line clossing; 2. Using dark
roasted coffee beans or over fi ne
coffee powder; 3. The fi lter of the
brewer is clogged. 1. Press any button to release to run
the self-check system; 2. Adjust
grinder wheel to rougher; 3. Start
brewer cleaning procedure (refer to
P20).
BREW UNIT STUCK
Internal parts stucked. Press any button to run the self-test
system.