21
9. Installation
9.1 Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm clearance around
the cutout should be provided.
Be sure the thickness of the work surface is at least 30mm. Please select
heat-resistant work surface material to avoid larger deformation caused by the
heat radiation from the induction hob. As shown below:
A(mm)
B(mm)
C(mm)
D(mm)
E(mm)
F(mm)
268
+
4-0
500
+
4-0
Min 50
Min 50
Min 50
Min 50
Under any circumstances, make sure the Induction cooker hob is well
ventilated and the air inlet and outlet are not blocked. Ensure the Induction hob
is in good work state. As shown below
Note: The safety distance between the hotplate and the cupboard above the
hotplate should be at least 760mm.
A(mm)
B(mm)
C(mm)
D
E
760
Min 50
Min 30
Air intake
Air exit 10 mm
Содержание PH2313IC
Страница 1: ...Induction Hob Instruction Manual Installation Manual MODEL PH2313IC...
Страница 24: ......