Philco PFTM26SI, Инструкция по эксплуатации

Страница: 23 / 39

●
●
●
Wherever possible the back of the
product should not be close to a wall to
avoid touching or catching warm parts
(compressor, condenser) to prevent
the risk of a fi re, follow the instructions
relevant to installation.
The refrigerator must not be locate close
to radiators or gas cookers.
Make sure that the mains plug is
accessible after the installation of the
refrigerator.
Note:
●
This refrigerator performs well within
the climate class from SN to T showed in
the table below.
It may not work properly if being left at a
temperature above or below the indicated
range for a long period.
5
Installing your new refrigerator
Service
Any electrical work required to do the
sevicing of the refrigerator should be
carried out by qualified electrician or
competent person.
This product must be serviced by an
authoized Service Center, and only
genuine spare parts must be used,
otherwise warranty maybe invalid.
●
●
Climate class Ambient temperature
Before using the refrigerator for the fi rst
time, you should be informed of the
following tips.
Ve n t i l a t i o n s y s t e m o f
refrigerator
In order to improve efficiency
of the cooling system and save
energy, it is necessary to maintain good
ventilation around the refrigerator for
the dissipation of heat. For this reason,
suf fi cient clear space should be available
around the refrigerator.
Recommendation : It is advisable for
there to be at least 75mm of space from
the back to the wall, at least 100mm from
its top, at last 100mm from its side to the
wall and a clear space in front to allow
the doors to open 135 . As shown in
following diagrams.