Copyright © 2020, Fast ČR, a. s.
Revision 01/2021
EN - 27
PART 9: TROUBLESHOOTING
FAULT
POSSIBLE CAUSE
TROUBLESHOOTING
Whitish stains remains on
dishes.
Not enough detergent used.
Use the correct amount of detergent,
as instructed in the programme table.
Rinse aid dosage and/or water
softener setting set too low.
Increase rinse aid and/or water
softener level.
High water hardness level.
Increase water softerner level and add
salt.
Salt compartment cap not closed
properly.
Check that the salt compartment cap
is closed properly.
Dishes do not dry.
Drying option is not selected.
Select a programme with a drying
option.
Rinse aid dosage set too low.
Increase rinse aid dosage setting.
Rust stains form on the
dishes.
Stainless-steel quality of the
dishes is insufficient.
Use only dishwasher-proof sets.
High level of salt in wash water.
Adjust the water hardness level using
water hardness table.
Salt compartment cap not closed
properly.
Check that the salt compartment cap
is closed properly.
Too much salt spilled in the
Dishwasher while filling it with
salt.
Use funnel while filling salt to the
compartment to avoid spillage.
A poor mains grounding.
Consult a qualified electrician
immediately.
Detergent remains in the
detergent compartment.
Detergent was added when the
detergent compartment was wet.
Make sure detergent compartment is
dry before use.
Содержание PDI 1468 BT
Страница 1: ...Dishwasher OWNER S MANUAL PDI 1468 BT PDI 1468 BTDX ...
Страница 35: ...Myčka nádobí NÁVOD K OBSLUZE PDI 1468 BT PDI 1468 BTDX ...
Страница 69: ...Umývačka riadu NÁVOD NA OBSLUHU PDI 1468 BT PDI 1468 BTDX ...
Страница 106: ...Zmywarka do naczyń INSTRUKCJA OBSŁUGI PDI 1468 BT PDI 1468 BTDX ...