Philco PDA 1281, Руководство пользователя

Страница: 11 / 112

EN - 9
03/2012 Copyright © 2012, Fast ČR, a. s.
Draining water

Connect the drain hose. The drain hose must be properly attached so that water does not leak. Check that
the hose is not knotted up or pinched.
Extending the hose

If you need to extend the drain hose, you must use the same type of drain hose.

The hose must not be longer than 4 meters. Otherwise the effi ciency of the dishwasher would be reduced.
Connecting the drain hose
You must connect the drain hose at a height from 50 cm (minimum) to 110 cm (maximum) from the bottom
part of the appliance. Secure the drain hose using a clamp. The loose end must not be submerged in water.
Built-in
This dishwasher is designed to be built-in. Adhere to all warnings and instructions contained in this user‘s
manual during installation.
Before installation check that the required dimensions of the dishwasher to be built-in correspond to the
dimensions of the installation location – see illustration below.
Removing the top cover
First unscrew the bolts fastening the top cover to the dishwasher.
Carefully pull the top cover outwards and lift it up.