Philco PD 1462 BiS, Руководство пользователя

Страница: 12 / 44

EN - 10
01/2016 Copyright © 2016, Fast ČR, a. s.
PART 4: QUICK START GUIDE
For detailed operating method read the corresponding content on the instruction manual.
Switch on the appliance. Open the door, press the On/Off button to switch on the appliance.
Fill the detergent
dispenser.
Compartment A:
With each wash cycle.
Compartment B:
For programmes with pre-wash only. (Follow the user instructions!)
Check the rinse aid level.
Mechanical indicator C.
Electric indicator on control panel (if provided).
Check the regeneration
salt level.
(On models with water softener system only.) Electric indicator on control
panel (if provided). If there is no salt warning light in the control panel
(for some models), you can estimate when to fi ll the salt into the softener
by the number of cycles the dishwasher has run.
Load the baskets.
Scrape off any large amount of leftover food. Soften remnants of burnt food in pans, then
load the baskets. Refer to the dishwasher loading instructions.
Select a programme.
Press the Programme Button until the selected programme lights up. ( See the section
entitled “Operation instruction”)
Running the dishwasher. Turn on the water tap, close the door. The machine will star t working after about 10 seconds.
●
Changing the
programme.
●
1. A running cycle can only be modifi ed if it has been running for a short time. Otherwise
the detergent may have already been released and the water already drain ed. If this is
the case, the detergent dispenser must be refi lled.
2. Open the door.
3. Press the Program button for more than 3 seconds
to cancel the running programme.
4. Select a new programme.
5. Restart the dishwasher.
●
Add forgotten dishes in
the dishwasher.
●
1. Open the door a little to stop the dishwasher.
2. After the spray arms stop working, you can open the
door completely.
3. Add the forgotten dishes.
4. Close the door, the dishwasher will start running again after 10 seconds.
●
If the appliance is
switched off during
a wash cycle.
●
If the appliance is switched off during a wash cycle, when switched on again, please re-
select the washing cycle and operate the dishwasher according to the original Power-on
state).
Switch off the appliance
When the working cycle has fi nished, the buzzer of the dishwasher will sound 8 times, then
stop.
Turn off the appliance using the On/Off Button.
Turn off the water tap,
unload the baskets
Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid
handling the dishes and utensils while they are still hot and more susceptible to break.
They will also dry better. Unload the appliance, starting from the lower basket.
WARNING!
Open the door carefully.
Hot steam may escape
when the door is opened!