Philco PD 1261 BiB, Руководство пользователя

Страница: 26 / 108

EN - 24
02/2012 Copyright © 2012, Fast ČR, a. s.
Monitoring the program
You can monitor the progress of the washing cycle by watching the indicator lights on the control panel turn
on and off .
NOTE:
Do not open the dishwasher until the ‘end of washing cycle’ indicator light turns on. During the drying
process the dishwasher will not make any sound for 40 – 50 minutes. This is a normal event.
Changing a program
A) Changing a program that is already running
1. Press the Start/Pause button.
2. After the washig cycle stops use the program button to select a new washing program.
3. The new washing program will replace the previous one. To start the new program press the Start/
Pause button.
B) Changing a program without resetting
1. Press and hold down the Start/Pause button for 3 seconds until the ‘end program’ indicator light starts
fl ashing.
2. Water is being drained while the ‘end the program’ indicator light is fl ashing.
3. As soon as the indicator light turns on, the program is ended.
WARNING!
It is dangerous to open the dishwasher door during a wash because you could be scalded by hot
water.
After the end of the washing cycle
1. After ending the washing cycle the ‘end the program’ indicator light (End) will turn on. Press the ON/OFF
button to turn off the dishwasher.
2. Disconnect the power cord from the power socket and shut off the water inlet.
NOTE:
Wait a few minutes before taking dishes out of the dishwasher so that you do not handle the dishes while
they are hot and more susceptible to breakage, and they will dry better too.
NOTE:
If you open the door during the washing cycle or an electrical power outage occurs, the washing cycle
will be interrupted and it will resume after the door is closed or the electrical power supply is renewed.