Philco PCE 3181HN/N, Руководство пользователя

Страница: 16 / 84

EN - 14
04/2011 Copyright © 2011, Fast ČR, a. s.
Holiday mode
When to use it:

You can use this mode if you will be away for a long time or you wish to empty the refrigerator.
Your refrigerator is designed in such a way that there is no moisture or odour created inside when it is put out
of operation.
Setting up:

Press the Mode (Mode) button four times until the holiday mode indicator lights up.

If while the holiday mode indicator is fl ashing you do not press any button, a sound will be made and the
mode will be activated.

During this mode the refrigerator and the freezer run at temperatures specially set in the control circuit.

If the holiday mode is activated the refrigerator indicator will show „ H “.
If the Holiday mode is selected:

If you press the Mode (Mode) button once, the holiday mode indicator will start fl ashing. If you wait
5 seconds the holiday mode will be cancelled and the refrigerator and the freezer will start running
according to the previously set temperatures.

If you press the Mode (mode) button twice and wait 5 seconds, the holiday mode will be cancelled and the
economical mode will be activated.

During the operation of the holiday mode it is not possible to perform any other actions, except for the
cancellation of the holiday mode and switching to the economical mode. If you wish to change the set
refrigerator or freezer temperature, you must fi rst cancel the holiday mode. Only then can you set the
refrigerator or freezer temperature in the manner described on pages 10, 12.
Open door sound signal
If you leave the refrigerator door open a light indicator will turn on. If the door remains open for longer than
2 minutes a sound will be made.
Notifi cations related to setting temperatures

If a there is an electrical power outage the entered settings will not be cancelled.

For reasons of effi ciency of your refrigerator, we do not recommend its use in an environment with
temperatures below 10 °C.

The indication bar to the right of the numbers indicates the temperature, it lights up based on temperature
(the lower the temperature the more segments are lit).

Do not go to a diff erent setting before completing the settings.
After connecting to a power source leave the refrigerator on for at least 24 hours so that it can fully cool
down to the temperature you set on the thermostat. Do not open the door of your refrigerator too often
during this time and do not insert too much food.