Philco HLS78D-I, Руководство по обслуживанию

Страница: 24 / 33

Chapter7 Factory mode parameter setting instructions and notes
7-1 Enter into the factory mode
Switch on TV set, and make it works normally:
Press
【
SETTING
】
key on the remote control.
Press number keys “3” 、 “1” 、 “3 、 “8” on remote control to enter password. Finish entering the factory mode.
If you want to quit the factory mode, Please. press
【
EXIT
】
key to exit source.
7-2
The list of factory mode as follow
：(only for reference)
First-class
navigation
Second-class navigation Parameter values
Third-class
navigation
Parameter values
Factory Setting
ADC Adjust
Mode PC-RGB
R-GAIN 1509
G-GAIN 1509
B-GAIN 1509
R-OFFSET 0
G-OFFSET 0
B-OFFSET 0
AUTO ADC FAIL
Customer setting
Gamma Table 0
Panel Setting
C32X16-E11-H_G0
1
Uart Enable On
Aging Mode Off
Ginga Off
Power On Mode Secondary
White Pattern Off
WDT On
PVR-RecordAll Off
W/B Adjust
Mode DTV
TEMPERATURE Medium
R-GAIN 1024
G-GAIN 1005
B-GAIN 1006
R-OFFSET 1024
G-OFFSET 1024
B-OFFSET 1024