Philco CleanAir25, Инструкция по эксплуатации

Страница: 13 / 16

13
M (medium) to H (high).
4. “ UV-C/Ion ” BUTTON:
Press this button to turn on/off the UV lamp and Ionizer.
3. “ TIMER ” BUTTON:
1) By pressing this button, the purifier can be timed to operate for intervals of 2
hours, 4 hours and 8 hours, stopping automatically when the selected operating
time has elapsed.
2) Press this button (Timer) to select the required operating time. A warning light
automatically indicates the remaining operating time.
3) To select the continuous operating mode, press the button repeatedly until
there
are no more indicator lights lit up.
Important note: When the unit is not in use, switch it off and unplug it.
INSTALLING & REMOVING FILTERS
FILTER REPLACE INDICATOR
The FILTER RESET light flickering continuously indicates that it is time to replace the
filter. Replace the filter according to the directions then press the POWER button and
hold for 5 seconds to restart the system. The light will stop flickering.
*Combination Filter will last approximately 6 months.
7. Open the front cover from the top.
8. Remove the combination filter by pull the two strips.
9. Insert new Combination Filter into the unit. Consult the strips on the filter for
correct installation direction.
10.
Reattach the extra Pre-filter to the Combination Filter.
11. Reattach the front cover of the unit and securely latch into place.