Phil Jones Bass BP-800 Скачать руководство пользователя страница 2

Страница: 2 / 10

Thank you for purchasing the PJB BP-800. A great deal of dedication and passion

went into designing and building this no compromise, high-performance compact

ampliﬁer.

We have used only the ﬁnest components from around the world to create the BP-800.

Reading this manual will enable you to get the best performance that you may

enjoy many years of service from it.

READ THIS FIRST

• Before using the BP-800 please read ALL the instructions.

•

On receipt of product, check for any signs of physical damage arising from shipping.

If any damage is visible contact your dealer.

• If possible, keep all original packing.

• Never use this product in the vicinity of water.

• Do not use this ampliﬁer in a way that would compromise its ventilation system.

• Do not locate this ampliﬁer near any heat source.

• This ampliﬁer must be connected only to a power source speciﬁed in this manual.

•

or safety do not leave the ampliﬁer plugged into a power source for long periods of

time when not in use as it is possible that electrical power surges from thunderstorms

can hurt the ampliﬁer.

• Do not let any liquid or foreign objects fall into any openings on the ampliﬁer.

• Never use this ampliﬁer if it has:

1. Suﬀered any physical damage.

2. Been subjected to : any liquids, rain or moisture.

3. Damaged cables connected to it.

If any of the above occurs, the ampliﬁer should be examined by qualiﬁed service

personnel.

• Always operate this ampliﬁer with the correctly rated fuse.

• Never use this ampliﬁer without proper grounding.

•

The mains plug is used as disconnect device, the disconnect device shall remain

readily operable.

•

Protective earthing terminal. The apparatus should be connected to a mains

socket

outlet with a protective earthing connection.

• Correct Disposal of this product. This marking indicates that this product should

not be disposed with other household wastes throughout the EU. To prevent possible

harm to the environment or human health from uncontrolled waste disposal,

recycle it responsibly to promote the sustainable reuse of material resources.

• The apparatus shall not be exposed to dripping or splashing.

Содержание BP-800











Результаты поиска

Содержание BP-800

Отзывы:

Бренды по названию

Популярные бренды

Phil Jones Bass BP-800, Руководство пользователя

Результаты поиска

Содержание BP-800

Отзывы:

Бренды по названию

Популярные бренды